• Follow us

Schneider PIX Up To 24KV Metal-clad Switchgear

Schneider PIX Up to 24KV Metal-clad Switchgear is an indoor switchboard assembly that provides maximum user safety, simplicity and reliability during installation, operation and maintenance. It meets all electrical distribution needs up to 24 kV and incorporates a set of innovative solutions.

Description

Schneider PIX Up to 24KV Metal-clad Switchgear

Schneider PIX Up to 24KV Metal-clad Switchgear is an indoor switchboard assembly that provides maximum user safety, simplicity and reliability during installation, operation and maintenance. It meets all electrical distribution needs up to 24 kV and incorporates a set of innovative solutions.

The PIX metal-clad switchgear are extensible on both sides and consist of modular functional units, linked by a busbar, and connected to the substation earth via an earthing bus.

The cubicles are subdivided by metal partitions into four separate compartments, including a low voltage compartment for the control and monitoring equipment.

The three Medium Voltage compartments; bus bar, equipment & cables, are fitted with an overpressure release system, oriented towards the top of the unit inside of cubicle volume. The fused switch-disconnectors are fixed type in the compartimented unit.

 

Features

It is compact in design and uses vacuum circuit breakers.

●Ratings up to 4,000 A / 40 kA for 12 kV and 17.5 kV range

Ratings up to 2,500 A and 31.5 kA for 24 kV range

Single and double busbar, insulated busbar

Loss of Service Continuity - LSC 2B PM

Internal Arc Classification (IAC) AFLR duration 1 s according to IEC62271-200

Floor or top cable connection

Back-to-wall or rear access configurations

Current and voltage transformers on busbar or cable side

Available with IS current limiter (Fault Current Limiter)

 

Benefits

Space saving, flexible cubicle width and back-to-wall installation

Safe and reliable with a full 1 second Internal Arc Classification - AFLR

Comprehensive interlocking, with all operations from the front

Can be fully installed from the front of the cubicle

Environmentally compatible, easy to recycle

Low installation and maintenance fees

 

Application

Energy: HV/MV substations, MV/MV substations, power generation

Infrastructure and Buildings: hospitals, airports, subways, railways, industrial& commercial buildings.

Industries: oil&gas, metal&mines, marine, automotive, food&beverages.

Data center


Technical Parameters

Items

Unit

Parameters

Product type


PIX12

PIX24

Rated voltage

kV

12

24

Rated frequency

Hz

50/60

50/60

Rated power frequency withstand voltage 1min

Phase-to-phase, phase-to-ground

kV

42

65

Isolation breaks

48

79

Rated lightning impulse withstand voltage (1.2/50μs)

Phase-to-phase, phase-to-ground

kV

75

125

Isolation breaks

85

145

Main bus maximum rated current

A

3150/4000*

3150*

Feeder rated current

A

630

630

1250

1250

1600

1600

2000

2000

2500

2500

3150

3150*

4000*


Rated short-time withstand current (4s)

kA

25

16

31.5

25

40

31.5

Rated peak withstand current

kA

100

80

Inner arc-fault current (1s)

kA

40

31.5

Enclosure protection level

Enclosure

IP4X

IP4X

Isolation compartment

IP2X

IP2X

Note: * Forced air cooling


Hot Tags: schneider pix up to 24kv metal-clad switchgear China, manufacturers, supplier, factory, wholesale, design, custom, application, PDF
Related Products

Feedback